BSB 4120 / BSB 4124

A flexible system

The buckling construction on the discharge side of the moving floor ensures an optimally dosed transition between the receiving hopper and the product cleaner. The moving floor consists of two very heavy roller chains with transverse cleats mounted between them. Because the polyester-nylon cloth is mounted with excess length over the cleats, a favorable take-away effect is created. The moving floor is driven by an electric motor mounted directly on the gearbox. This results in better power transfer. The moving floor speed is continuously adjustable. If desired, the system can be expanded with automatic capacity control. This control unit is connected to the frequency converter and consists of a sensor for ultrasonic layer thickness measurement and a PLC-control.

BSB 4120
BSB 4120
BSB 4124
  • Heavy baseframe with standard option to mount the cleaner.
  • Double drive to the drive shaft of the unloading floor chains. The gear units are equipped with a direct drive, with separate engine cooling so that the engine is always optimally cooled.
  • The moving floor consists out of 2.000 mm or 2.400mm (depending on the model) wide tubular profiles, covered with a polyester nylon cloth.
  • The hollow sections are mounted on both sides on a rugged 4 inch heavy bottom chain.
  • Floor mat with stainless steel wear plates under the side seals, optimizing the life of the floor garment.
  • A in height-adjustable front panel for a flexible input of the crop.
  • Double sealing with rubber flaps, prrevending spillage during input.
  • Viewing grids in the side panels to be able to observe the product level.
  • Remote control is equipped with an on/off push button, emergency stop and rotary knob with scale for setting the speed of the unloading floor.
  • Large wheels for easy transport of the receiving hopper.
  • BLC Line Module System.
  • Automatic capacity control (ACR).
  • Automatic chain lubrication.
  • Rubber sealing flap at the front to the floor.
  • Drive-in light: 2 LED lights with 4 LEDs, lights continuously when the cistern is switched on
  • Drive-in light: 2 LED lights with 4 LEDs, goes out when the tipping trailer is far enough in the cistern.
  • Dosing reel DH.
  • Frequency control on dosing reel DH.
  • Sealing of the advance, adjustable by means of cloth and cable with spring adjustment.
  • Sealing of the advance, 3 bulkheads.
  • Cross discharge conveyor (AFB 330-70), mounted directly behind the cistern.
  • Transfer belt TKB, 1,300 mm long, including frequency converter.
 
Model BSB 4120 BSB 4124
Moving floor length 4,100 mm 4,100 mm
Moving floor width 2,000 mm 2,400 mm
Moving floor speed 0.24 m / min - 4,34 m / min 0.24 m / min - 4.34 m / min
Capacity max. 60 tons / hour max. 60 tons / hour
Drive 2.2 kW 2.2 kW
Input width 3,100 mm 3,100 mm
Input height 750 - 910 mm 750 - 910 mm
Content 12.6 m3 13.4 m3
Length 6,560 mm 6,560 mm
Width 3,300 mm 3,300 mm
Height 2,770 mm 2,770 mm

* Subject to technical changes.

Request more information

"Contact us and let us inform you about the possibilities"

- Theo Ypma
Field with * are required