BSB 6120 XL / BSB 6124 XL

A gentle heavyweight

The XL models of the BSB series guarantee a high capacity. The buckling construction on the discharge side of the moving floor ensures an optimally dosed transition between the receiving hopper and the product cleaner. The drive takes place on both sides of the moving floor, which consists of two very heavy roller chains with transverse cleats mounted between them. Because the polyester-nylon cloth is mounted with excess length over the cleats, a favorable take-away effect is created.

Heavy baseframe with standard option to mount the cleaner.
Double drive to the drive shaft of the unloading floor chains. The gear units are equipped with a direct drive, with separate engine cooling so that the engine is always optimally cooled.
The moving floor consists out of 2.000mm or 2.400mm (depending on the model) wide tubular profiles, covered with a polyester nylon cloth.
The hollow sections are mounted on both sides on a rugged 4 inch heavy bottom chain.
Floor mat with stainless steel wear plates under the side seals, optimizing the life of the floor garment.
Central support of the cleats.
A in height-adjustable front panel for a flexible input of the crop.
Double sealing with rubber flaps, prrevending spillage during input.
Viewing grids in the side panels to be able to observe the product level.
Remote control is equipped with an on/off push button, emergency stop and rotary knob with scale for setting the speed of the unloading floor.
Large wheels for easy transport of the receiving hopper.
BLC Line Module System.

Automatic capacity control (ACR).
Automatic chain lubrication.
Rubber sealing flap at the front to the floor.
Drive-in light: 2 LED lights with 4 LEDs, lights continuously when the cistern is switched on
Drive-in light: 2 LED lights with 4 LEDs, goes out when the tipping trailer is far enough in the cistern.
Dosing reel DH.
Frequency control on dosing reel DH.
Sealing of the advance, adjustable by means of cloth and cable with spring adjustment.
Sealing of the advance, 3 bulkheads.
Cross discharge conveyor (AFB 330-70), mounted directly behind the receiving hopper.
Transfer belt TKB, 1,300 mm long, including frequency converter.

Model	BSB 6120 XL	BSB 6124 XL
Input width	3.100 mm	3.500 mm
Input height	750 - 910 mm	750 - 910 mm
Floor length	6.100 mm	6.100 mm
Floor width	2.000 mm	2.400 mm
Floor speed	0,24 - 4,34 m/min.	0,24 - 4,34 m/min.
Volume	18,2 m³	20,9 m³
Capacity	80 tons/hour	90 tons/hour
Drive	2 x 2.2 kW	2 x 2.2 kW
Length (without product cleaner)	8.650 mm	8.650 mm
Width	3.180 mm	3.580 mm
Height (without bracket for ACR)	3.000 mm	3.000 mm

* Subject to technical changes.

Watch the product video!

Request more information

"Contact us and let us inform you about the possibilities"

- Theo Ypma