Telescopic conveyors

Extremely flexible

The Bijlsma Hercules telescopic conveyors are a very flexible link when sorting your crops, because they are adjustable in length and because the two conveyors can be pivoted to each other at any desired angle. The falling height between the two conveyors can be reduced to a minimum with a threaded adjuster on the travelling carriage. Your product is therefore in good hands with our telescopic belts.

Extremely manoeuvrable

A sophisticated tandem wheel construction makes the telescopic tires extremely manoeuvrable. One person can relocate the conveyors smoothly and easily or adjust the height. The length is adjusted by means of a hand winch. The switchbox is mounted on the travelling carriage makes it possible to operate them from two sides. Since both conveyors are electrically connected to each other via a special cable guide, only one cable is needed for the power supply.

Steering rod at the front wheels with which the machine can be manoeuvred easily into the smallest corners.
Round input funnel for easy set-up, so that the product can be deposited onto the machine from each side.
Adjustable height between the first and second belt, for minimum drop height.
Centrally placed control box for ergonomic operation.
Two swivel castors and two fixed rubber castors, all Ø 200 mm.
Castor wheels with brakes for stable support and easy movement of the machine.
Height adjustment with pin/hole connection, so that the machine can be set to the correct height.
BLC Line Module System.

Electric length adjustment.
Variable speed control by a frequency converter on the first conveyor.
Variable speed control by a frequency converter on both conveyors.
Castor wheels Ø 250 mm instead of standard Ø 200 mm.
Discharge height 1,700 mm by means of a cylinder with hand pump.
Connection part for mounting on the coupling yoke of the storage loader.
Line module cables for the BLC line module system.

Model	TEL 2-607	TEL 2-807	TEL 2-808-80
Belt length	2 x 6,000 mm	2 x 8,000 mm	2 x 8,000 mm
Belt width	700 mm	700 mm	800 mm
Belt shape	special trough	specially trough	specially trough
Belt support	carrier rollers Ø 50 mm	carrier rollers Ø 50 mm	carrier rollers Ø 50 mm
Length retracted	7,080 mm	9,080 mm	9,080 mm
Extended length	11,800 mm	15,800 mm	15,800 mm
Embedding height	750 - 1,180 mm	750 - 1,180 mm	750 - 1,180 mm
Discharge height	800 - 1,500 mm	800 - 1,500 mm	800 - 1,500 mm
Length for the wheels	1,600 mm	1,600 mm	1,600 mm
Belt speed	24/48 m / min.	24/48 m / min.	24/48 m / min.
Upper belt drive	0.55 / 1.1 kW	0.55 / 1.1 kW	0.75 / 1.5 kW
Lower belt drive	0.55 / 1.1 kW	0.55 / 1.1 kW	0.75 / 1.5 kW
Weight	1,220 kg	1,420 kg	1,600 kg

* Subject to technical changes.

Request more information

"Contact us and let us inform you about the possibilities"

- Theo Ypma