BSB 8124 XXL

King of the receiving hoppers

The BSB 8124 XXL receiving hopper is the largest model in the BSB series. With a volume of no less than 30 m3, this variant is also suitable for industrial companies. The buckling construction on the discharge side of the moving floor ensures an optimally dosed transition between the receiving hopper and the product cleaner. The drive takes place on both sides of the moving floor, which consists of two very heavy roller chains with transverse cleats mounted between them. Because the polyester-nylon cloth is mounted with excess length over the cleats, a favorable take-away effect is created.

Heavy baseframe with standard option to mount the cleaner.
Double drive to the drive shaft of the unloading floor chains. The gear units are equipped with a direct drive, with separate engine cooling so that the engine is always optimally cooled.
The moving floor consists out of 2.000 mm or 2.400 mm (depending on the model) wide tubular profiles, covered with a polyester nylon cloth.
The hollow sections are mounted on both sides on a rugged 4 inch heavy bottom chain.
Floor mat with stainless steel wear plates under the side seals, optimizing the life of the floor garment.
Central support of the cleats.
A in height-adjustable front panel for a flexible input of the crop.
Double sealing with rubber flaps, prrevending spillage during input.
Viewing grids in the side panels to be able to observe the product level.
Remote control is equipped with an on/off push button, emergency stop and rotary knob with scale for setting the speed of the unloading floor.
Large wheels for easy transport of the receiving hopper.
BLC Line Module System.

Automatic capacity control (ACR).
Automatic chain lubrication.
Rubber sealing flap at the front to the floor.
Drive-in light: 2 LED lights with 4 LEDs, lights continuously when the receiving hopper is switched on
Drive-in light: 2 LED lights with 4 LEDs, goes out when the tipping trailer is far enough in the receiving hopper.
Dosing unit DH.
Frequency control on dosing unit DH.
Frontside coverage, adjustable by a cloth and cable clamping device with spring.
Frontside coverage, 3 panels.
Cross conveyor (AFB 330-70), mounted directly behind the cistern.
Forwarding belt TKB, 1.300 mm, including frequency converter.

Model	BSB 8124 XXL
Input width	3.500 mm
Input height	750 - 910 mm
Moving floor length	8.100 mm
Moving floor width	2.400 mm
Moving floor speed	0,24 - 4,34 m/min.
Volume	30,6 m³
Capacity	90 tons/hour
Drive	2 x 2.2 kW
Length	10.440 mm
Width	3.610 mm
Height	adjustable

* Subject to technical changes.

Request more information

"Contact us and let us inform you about the possibilities"

- Theo Ypma